|
The picture above depicts a 8' double sided gondola
configured with two sections and one end that includes: all the
trim pieces such as front kick plates, base shoe covers, and upright
covers.
The double sided sections are designed to be placed
in the center portion of the merchandising floor and can be used
to separate the store and aisles.
We have double sided sections available in depths
as small as 12" and as deep as 30" with heights that start
at 36" up to 96". Floor anchors are suggested and
available for all heights above 48". Check with your
contractor, city and county building codes.
Sold Separately
Upper Shelves available in two inch increments starting
at 8 inches to 30 inches deep. Widths of a standard 36 inch and
a 48 inch stocked in the beige black and dove gray colors. 24 inch
and the 30 inch available by special order.
Available in all standard finishes, optional finishes,
and custom paterns also.
Smaller shelves sit at a 15 degree up slope, flat
and a 15 degree down slope. Besides the flat position the downslope
position is best for snacks, chips, and candy with a 3 inch high
front fence or a one inch high front retainer. The deeper shelves
sit at a 15 degree and 30 degree up slope, flat and a 15 degree
and 30 degree downslope
The Convenience Store End Cap is configured with
the same components as the double sided and single sided gondolas.
As it is a single sided section in a double back configuration it
can easily be installed right up against and existing aisle of double
sided Convenience Store Gondolas.
As pictured above you can configure a complete counter system
from front to back using Gondola Shelving that can be interchangeable
with all of the Gondola Shelving through out the whole store.
Convenience store candy racks are designed to offer a variety of
candy options to customers in a convenient and easily accessible
way. Typically placed in high-traffic areas to entice customers
to make impulse purchases.
|
The picture above depicts a 8' single sided section of Wall Convenience
Store Shelving configured with two sections and one end that
includes: all the trim pieces such as front kick plates, base shoe
covers, and upright covers.
The single sided sections are designed to sit flush
against a wall as the wall will provide support and stability.
Heavy gauge steel wire construction, powder coated for long life
and extra wear constructed for Potato Chips in a Grocery Store,
Candy, Bed Linen, and more.
Our Plastic Bottle Slides are an important component
of the Wire Bottle Display Racks. Bottles slide to the foremost
product position whenever a bottle is removed. The panels are removable
from the shelf for easy cleanup.
Upper shelves are configures with a heavy duty shelf
sittint at a ten degree downslope for optimal performance in sliding
and reloading.
Freestanding Wire Binning System Front Fences and
Dividers for Store Shelving allows the flexibility in merchandising
of smaller and lighter products. The fences and dividers for store
shelving have welded on “feet” for attachment to shelf perforations
on upper shelves. Fronts and Store Shelving Dividers may be used
independent of one another to divides a shelf into sections of bins.
Vertical wire are on 1" centers. Chrome plated finish.
The 4 Way Display an island display suited for a small
Convenience Store with Limited Space that will provide merchandising
on all 4 sided for maximum exposure.
|
